KUS temperature sensor type 3 for engine or gear oil - M14x1,5

KUS temperature sensor type 3 for engine or gear oil - M14x1,5

sold in last

watch this article

24,40 €

incl. 20% VAT, plus

Thread Type: M14 x 1.5 (Type 3) – Analog KUS oil temperature sensor made of brass with a metric M14 fine-pitch thread. Signal range 300–23 ohms for KUS oil gauges. Equipped with an integrated safety warning contact that triggers at a critical oil temperature of 120°C. IP67.

For this product you will receive 24.4 Reward Points

Version Type III
Type III Type III
Thread M14x1,5
M14x1,5 M14x1,5M16x1,5 M16x1,53/8"-18NPT 3/8"-18NPT

Only 1 Pcs. left in stock!

Pcs.

1 Pcs. In stock

Delivery time: 6 - 8 Workdays

Stock in the external warehouse 17 piece
Delivery time: 3 Working days

KUS temperature sensor type 3 for engine or gear oil - M14x1,5

24,40 €

incl. 20% VAT, plus

Pcs.

KUS Marine Oil Temperature Sensor / Transmitter Type 3 – Precise Measurement for Engine & Transmission Oil with a 120°C Alarm

Effectively protect your valuable powertrain from thermal overload! The original KUS oil temperature sensor (Type 3) continuously measures the exact heat build-up in your engine oil or transmission lubrication system. It converts the temperature values into the standardized analog resistance range of 300 to 23 ohms. This makes it the perfect, error-free sensor partner for all analog and digital KUS oil temperature gauges (50–150°C) at the helm.

What sets the highly advanced Type 3 model apart is that the sensor features an integrated, separate warning contact (alarm switch). As soon as the oil reaches the critical threshold of 120°C, the contact closes automatically. This allows you to activate a separate red warning light or an acoustic KUS warning buzzer in the cockpit—in addition to the temperature gauge—to prevent an impending loss of the lubricating film in a timely manner.

⚠️ Important note on sensor compatibility & thread selection:

This temperature sensor provides the standard KUS characteristic curve of approximately 300 ohms at 50°C to 23 ohms at 150°C. Please select the exact thread size that matches your engine block or marine transmission from the drop-down menu above:

M14 x 1.5 thread (metric fine-pitch thread, integrated 120°C alarm)
Thread M16 x 1.5 (metric fine thread, built-in 120°C alarm)
3/8" - 18 NPT (American tapered pipe thread, built-in 120°C alarm)

Advantages & Technical Highlights at a Glance:

Integrated 120°C warning contact: Maximum motor protection through simultaneous analog measurement and visual/acoustic alarm triggering (2-pole connection).
Robust brass housing: Excellent thermal conductivity for extremely fast response times during sudden temperature spikes, as well as absolute resistance to aggressive, hot oils and chemicals.
Fully encapsulated IP67 protection class: The sensor head and connection contacts are completely dust- and watertight—optimally protected against splashing water, oil, and bilge moisture.
Universal marine use: Fully compatible with all engine oils, transmission oils, shaft lubricants, and hydraulic fluids in 12-volt and 24-volt onboard systems.

🛠️ Accessory tip from Tenten-Boats:

Don’t forget the right gauge! Order the visually perfectly matched, saltwater-resistant KUS analog oil temperature gauge (52mm) right along with it to ensure seamless lubricant monitoring in your cockpit.

Technical Data (Specifications):

Property	Specification / Value
Manufacturer / Brand	KUS
Sensor Type	Type 3 (Analog Measurement + Digital Alarm Contact)
Output Signal (Resistance)	300–23 ohms Characteristic curve (KUS temperature standard)
Measuring Range	+50°C to +150°C
Alarm threshold	120°C ± 3°C (Integrated warning contact)
Housing Material	High-quality, thermally conductive marine brass
Protection rating	IP67 (waterproof and dustproof at the connector head)